logo


R.L.S. SOS – “Emergency” levelling system with breakable clips

WATCH THE VIDEO



  • RLS SOS system is an auxiliary levelling system provided with breakable clips that allows the following:
    – complete the leveling of tiles in case of breakage (in the tightening phase) of a clip of the main leveling system;
    – integrate the main leveling system to refine tile levelling.
    Without removing tiles.
  • It is simple to use and quick to remove. It does not damage the tiles (no scratches nor chipping).
  • It is made of 3 elements: SOS clips, caps, protection ring (cap and ring are the same as the VITE Raimondi levelling system).
  • Insert SOS clips in the joint (minimum 1,5 mm – 1/16”), rotate them 90° and then tighten by screwing the cap: tile levelling achieved.
  • Once tile adhesive has hardened, remove clips by hit them parallel to joint line and thus separating the upper portion of the clip from the part underneath the tiles.
  • SOS clip is designed to be removed, by breaking it, once tile adhesive has hardened allowing the following advantages:
    – removal is fast and easy;
    – the floor is not stepped on prematurely;
    – no tile damage (chipping);
    – remove SOS clips simultaneously with main levelling system clips.
  • Technopolymer-made clip does not damage the tiles either during insertion or removal.
  • Dual component protection ring eliminates any risk to scratch tiles, even the most delicate.
  • The SOS clip is made of mineral fibers reinforced technopolymer so to provide the necessary tensile strength to level tiles.
  • The number of SOS clips to be used varies according to the type of tile (thickness, weight, size, possible curvature) and leveling requirements. It is suggested to use at least two SOS clips close
    together.
  • For full details about RLS SOS proper use refer to on-line instructions.
  • Requirements for use:
    – Joint (distance between tiles) minimum 1,5 mm (1/16”), maximum 5 mm (13/64”);
    – Tile thickness from 3 to 20 mm (3/8” – 3/4”);
    – Minimum layer of adhesive underneath the tiles: 3,5 mm (9/64”) thickness;
  • RLS SOS packaging options:
    – Kit: 100 SOS clips, 30 caps, 30 anti-scratch protection rings. Comes into plastic bucket (Art. 180VSOSKIT0100);
    – Blister: 130 SOS clips (Art. 180VSOS0130).

SOS CLIPS + CAPS + PROTECTION RINGS KIT – ref. 180VSOSKIT0100

In the picture, from the left: bucket KIT, SOS clip (100 pieces), cap (30 pieces), protection ring for delicate tiles (30 pieces)


130 SOS CLIPS – ref. 180VSOS0130

In the picture, from the left: blister, SOS clip (130 pieces)



error: Content is protected !!