Maximum length
150 cm (59”)
|
|
|
Maximum depth
80 mm (3 1/8”)
125 mm (4 7/8”)
|
|
|
Motor power
2,8 HP – 2,1 kW
|
|
|
Ø discis
Ø 300 mm (12”)
Ø 350 mm (14”)
|
• For cutting porcelain, single-double fired, marble, granite, etc… Straight, 45° bevel (Jolly) & plunge cuts.
• Maximum length of cut 150 cm (59”).
• Maximum thickness of cut: 80 mm (3 1/8”) in single pass; 125 mm (4 7/8”) in double pass.
• Precise cutting is obtained through use of micrometric depth adjuster which allows incremental adjustment of the blade height.
• Maximum blade Ø 350 mm (14”); minimum blade Ø 300 mm (12”).
• Super heavy duty pump and water jets help to flush out the cut and extend blade life.
• Sliding motor assembly with Cast aluminum housing and rail supports, extruded aluminum rail.
• Tilting motor assembly for performing bevel cuts from 0° to 47°.
• Legs can be removed quickly for storage and two lifting handles on each end of the saw provide a means for transport.
• Supplied with: key kit, wrench, user and aintenance manual.
Download
Gallery