BI-BULLDOG ADV WITH WHEEL KIT FEED
 Maximum length |
 Mill radius |
 Cutting width |
 Motor power |
• For bullnosing and bevelling. Create 1/2 Bullnose, full bullnose, 45° bevel (Jolly) on: marble, granite, porcelain, single and double fired.
• Double motor assembly for operating with two diamond wheels of different type simultaneously and cut times.
• Provided with wheel feed kit.
• Maximum length of shaping: 120 cm (47 1/4”).
• Minimum tile width: 4,5 cm (1 49/64”). Maximum tile width: 60 cm (23 5/8”).
• Maximum depth of shaping/radius half bullnose: 30 mm (1 3/16”).
• Double motor assembly for operating with two diamond wheels of different type simultaneously and cut times.
• Provided with wheel feed kit.
• Maximum length of shaping: 120 cm (47 1/4”).
• Minimum tile width: 4,5 cm (1 49/64”). Maximum tile width: 60 cm (23 5/8”).
• Maximum depth of shaping/radius half bullnose: 30 mm (1 3/16”).
• Maximum depth of shaping full bullnose: 22 mm (7/8”); wheel radius: 11 mm (7/16”).
• Optional: external tank + pump kit.
• Three levels of finishing: rough, finished, polished.
• Gear ratio of motor to wheel 1 ÷ 1.6. Drive belt type poly V.
• Heavy duty water pumps provides superior wheel cooling.
• Supplied with: universal table, key kit with wrench, dressing stone, user and maintenance manual.
• Optional: external tank + pump kit.
• Three levels of finishing: rough, finished, polished.
• Gear ratio of motor to wheel 1 ÷ 1.6. Drive belt type poly V.
• Heavy duty water pumps provides superior wheel cooling.
• Supplied with: universal table, key kit with wrench, dressing stone, user and maintenance manual.
Watch the video
Download
Gallery
Raimondi Spa 2012 Copyright All Right Reserved