DUST SUPPRESSION DEVICE WITH WATER
Art. 433PWW A
- Wet cooling device to be used in combination with POWER RAIZOR and BC45.
- Blade cooling with water grants:
1) Complete suppression of dust;
2) Better cut finishing;
3) Quicker cut.
- Both adjustments onto tap and onto spraying nozzle allow a perfect cooling with a minimal amount of water.
- To be used only in combination with cordless (battery operated) angle ginders and/or corded models having rating
IP 54* or any higher.
- Can be used with any cutting position/angle (45°/90°/180°) .
- Carrytank capacity of 8 litres (1,75 gal) with relief valve.
*Safety Regulations may vary from Country to Country. Therefore, it is strongly recommended to refer & comply to the legislation in force on the Country where the products is being used.
DUST CONTAINMENT DEVICE
Art. 433PWZP A
- Dust containment device to be used in combination with POWER RAIZOR cutting unit.
- Used in combination with a proper aspirator, it allows to radically reduce the amount of dust on the environment while dry cut is performed.
- The device can be used onto POWER RAIZOR equipped with any kind of angle grinder.
- Adjustable according with slab thickness.
- Can be used for 45° miter cut and 90° straight cut.
WATCH THE VIDEO
DOWNLOAD THE BROCHURE Download