logo


rls basi

  • BASI DI ALTA QUALITÀ PER TUTTE LE ESIGENZE

    Le basi del sistema R.L.S. sono di altissima qualità ed adatte a tutte le esigenze. Scopri tutte le caratteristiche.

  • CARATTERISTICHE TECNICHE

    Il sistema R.L.S. offre diverse tipologie di basi per lavorare su materiali di spessore compreso tra i 3 ed i 20 mm e che consentono di lasciare un giunto tra la piastrelle di poco più di 1,5, 3 o 4 mm.

    Tutte le basi R.L.S. hanno il punto di rottura vicinissimo al piano di appoggio della piastrella (1,2 mm) il che consente l’utilizzo in sicurezza del sistema anche con materiali ultrasottili (3 mm), in quanto anche in questa ipotesi rimangono 1,8 mm di spessore per l’applicazione del sigillante.

    rls dett punto rottura

    Le basi del sistema R.L.S. sono realizzate con materiale plastico di primissima qualità la cui composizione è stata severamente testata per garantire il perfetto equilibrio tra elasticità e resistenza indispensabile per espletare correttamente la funzione per la quale sono state concepite.

    Le basi R.L.S. sono disponibili in svariati packaging (a partire da 100 e fino a 2.000 pezzi) per adattarsi al meglio alle esigenze ed ai consumi di ogni singolo cantiere.

    Tutte le basi del sistema R.L.S. utilizzano lo stesso cuneo e le stesse pinze.

  • BASI PER PIASTRELLE DI SPESSORE DA 3 A 12 mm

    Il sistema R.L.S. offre ben 3 basi per piastrelle di spessore compreso tra 3 e 12 mm.

    La differenza tra i 3 modelli consiste nello spessore del giunto che la base lascerà tra le piastrelle una volta rimossa.

    Per ottenere un giunto tra le piastrelle di

    1,5 mm: base di colore trasparente.

    Per ottenere un giunto tra le piastrelle di

    3 mm: base di colore rosso.

    Per ottenere un giunto tra le piastrelle di

    4 mm: base di colore grigio.

    Per tutte le basi si utilizza lo stesso cuneo e la stessa pinza.

    rls combo basi con spess
  • BASI PER PIASTRELLE DI SPESSORE DA 12 A 20 mm

    Il sistema R.L.S. offre anche una base per piastrelle di spessore compreso tra 12 e 20 mm (di colore bianco) utilizzabile anche su materiali di forte spessore.

    La base h12/20 mm lascia un giunto tra le piastrelle di 1,5 mm.

    Anche per le basi h12/20mm si utilizza lo stesso cuneo e la stessa pinza idonee per le basi h3/12mm.

    rls_base_1220mm

  • PROVA

    E ALLORA???

  • PREMIUM QUALITY CLIPS FOR EVERY NEED

    R.L.S. has high quality clips (bases) which meets the various needs. Find out all the technical features.

  • TECHNICAL FEATURES

    R.L.S. offers several kind of clips suitable for materials of minimum thickness 3 mm and maximum 20 mm (1/8” – 3/4”) and which leave joint between the tiles a little big larger than 1.5 mm, 3 mm or 4 mm (1/16” – 1/8” – 5/32”).

    All R.L.S. clips have the breaking point very close to the plane where the tiles lay (1.2 mm – 3/64”). This means the system can be used without any problem even on very thin tiles (3 mm – 1/8”) since it still remains a gap of 1.8 mm (5/64”) for the grout.

    rls dett punto rottura

    R.L.S. clips are made with premium quality plastics whose composition has been severely tested to ensure the perfect balance between elasticity and resistance; indispensable to carry out properly the function for which they were designed.

    R.L.S. clips are available in a various packaging (from 100 and up to 2,000 pieces) to best fit the needs and consumption of each job site.

    All the models of the R.L.S. clips use the same wedge and the same pliers.

  • CLIPS FOR TILE THICKNESS 3-12 mm (1/8-1/2 inch)

    R.L.S. offer 3 different clips (bases) for tiles of thickness included within 3 and 12 mm (1/8” - 1/2”).

    The difference within them lies in the dimension of the joint that each model leaves between the tiles.

    To obtain a joint just slightly bigger than

    1,5 mm (1/16”) : clips in transparent color.

    To obtain a joint just slightly bigger than

    3 mm (1/8”) : clips in red color.

    To obtain a joint just slightly bigger than

    4 mm: 4 mm (5/32”) : clips in grey color.

    Wedge and pliers are the same for all of the bases / clips models.

    rls combo basi con spess
  • CLIPS FOR TILE THICKNESS 12-20 mm (1/2-3/4 inch)

    R.L.S. also offer one clip for tiles of thickness included within 12 a 20 mm (1/2”-3/4”) which can be used for thicker materials. This clip is in white color.

    The h12/20 mm (1/2”-3/4”) clips leave a joint between tiles of 1.5 mm (1/16"")

    The h12/20 mm (1/2”-3/4”) clips use the same wedge and pliers suitable for h3/12mm clips (1/8”-1/2”)

    rls_base_1220mm


error: Content is protected !!